Crankworx Yamaha WR450F 07-15 YZ450F 06-09 Conrod Kit

SKU: CWRYZF4506T


$179.95

or 4 fortnightly payments of $44.99 with

RRP $199.95
SAVE $20.00 (10%)

Flat fee shipping!
Overnight courier from just $7
*Conditions Apply

Order before 3.30pm,
we ship today
*Conditions Apply

Yamaha Conrod Kit from Crankworx. Crankworx have taken their manufacturing processes of their high performance Top Rod conrod to the next level in durability & strength 

The Crankworx Top Rod has been designed specifically for use in stock, high modified or big bore engines for the pro racer to the everyday trail rider. When properly installed the Crankworx Top Rod will perform flawlessly in the highest powered engine at the highest level of the sport.

Crankworx Top Rod is a true performance racing conrod - being manufactured from double forgings resulting in the correct grain flow for strength, shotpeen to relive stress, magnafluxed at least twice to check for imperfections and Rockwell tested to validate hardness. Bearings running surfaces are round to 50 millionths and double hone to a mirror finish. Each conrod has a true racers top end with a special aluminium/silicon/bronze bush installed, this extends the conrod, piston and pin life under extreme loads at rpm. (have a look at the other brands and it will be easy see why real racers prefer Crankworx)

Motoxparts can fit and balance this rod to your crank for a low cost - 98% of motorbike crankshafts are rebuildable. Installing a conrod crankshaft rebuild will take the important working areas of the crankshaft back to new specifications. More information about this service can be found in the ;Engine category under Crankshaft & Bearings.

  • Meets/Exceeds genuine
  • Conrod kit includes: Conrod, crankshaft/conrod main big end pin, conrod center big end bearing, thrust washers
  • Manufactured from true forgings resulting in the proper grain flow
  • Each part is double magnafluxed
  • Rockwell tested to validate the correct hardness
  • Conrod is shotpeen to relieve stress
  • Conrod has a bushed end bearing this is made from special aluminium/silicon/bronze material increases piston and pin life
  • All Crankworx conrods are a direct replacement part - Can be used in genuine, Prox, Wiseco, Hot Rods, Crankworx and all other brands of crankshafts.
  • Image is generic and may differ slightly to part supplied.

(CWRYZF4506T)

SKU CWRYZF4506T
Brand Crankworx
Loading...

Be The First To Review This Product!

Help other MotoXparts users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

Vertex Yamaha YZ450F 03-09 WR450F 05-13 (Oversized) Piston Kit 99.96mm
23270500

Vertex Yamaha YZ450F 03-09 WR450F 05-13 (Oversized) Piston Kit 99.96mm

$357.78 $264.50
26% OFF

More From This Category

Rollex KTM 85/105SX 03-25 Husqvarna TC85 14-25 Crankshaft Main Bearing and Seal Kit
CBK60002

Rollex KTM 85/105SX 03-25 Husqvarna TC85 14-25 Crankshaft Main Bearing and Seal Kit

$149.95
All Balls KTM / Husqvarna / Husaberg / GasGas 250-300 Main Bearings And Seal Kit
24-1098

All Balls KTM / Husqvarna / Husaberg / GasGas 250-300 Main Bearings And Seal Kit

$239.95
All Balls Suzuki RM250 89-93 Main Bearings And Seal Kit
AB241018

All Balls Suzuki RM250 89-93 Main Bearings And Seal Kit

$110.00
Crankworx KTM 250EXC/SX/XC 04-24 300EXC/XC 04-23 Husqvarna TE250-300 14-23 Conrod Kit
CWRKTM300T

Crankworx KTM 250EXC/SX/XC 04-24 300EXC/XC 04-23 Husqvarna TE250-300 14-23 Conrod Kit

$179.95 $159.95
11% OFF
Hot Rods KTM / Husqvarna / Husaberg / GasGas 250-300 Main Bearings And Seal Kit
K066

Hot Rods KTM / Husqvarna / Husaberg / GasGas 250-300 Main Bearings And Seal Kit

$169.95
Kawasaki KX85 06-13 Engine Rebuild Kit (48.46MM Wossner Piston)
EKKX8506WOSB

Kawasaki KX85 06-13 Engine Rebuild Kit (48.46MM Wossner Piston)

$664.75 $579.95
13% OFF