SpeedBox 1.6 B.Tuning for Bosch Gen 5

SIMPLIFIED INSTALLATION No need to find a suitable position for the Magnet Simulator DESIGNED FOR MOTORS: Performance Line CX - 5th Generation (motor mounted with 2 bolts) PROPERTIES: Maximum speed: Unlimited (max 35 km/h recommended) Display shows: Real speed: NO (only in SpeedBox App) Correct travelled distance: After the countdown process is finished Activation/deactivation (do not perform while riding): SpeedBox App WALK function Buttons - + - + Indication of tuning activation/deactivation: YES (3.5/2.5 km/h) Compatible with: Performance Line CX - 5th Generation E-bikes that have a magnet attached to a valve (Bosch Rim Magnet) The current Bosch software version Not compatible with: Standard magnet ABS system Motors of 4th generation Please check your e-bike type and motor space before purchasing the product SpeedBox 1.6 B.Tuning for Bosch (Smart System Gen.5 + Rim Magnet) SpeedBox 1.6 B.Tuning is a premium tuning chip with integrated Bluetooth technology, designed for Bosch Performance Line CX motors (5th Generation) paired with the Smart System and valve-mounted Rim Magnet. It removes the factory speed limiter and connects seamlessly to your mobile phone via the SpeedBox App, giving you full control over tuning settings and access to real-time ride data. Key Features Bluetooth-enabled tuning with mobile app control Simplified installation — no need for magnet simulator positioning Activation via SpeedBox App, WALK assist, or button sequence (- + - +) Adjustable speed limit up to 99 km/h (recommended max: 35 km/h) Display behavior: Real-time speed: Visible only in SpeedBox App Accurate distance: Displayed after post-ride countdown Tuning status: Indicated by 3.5 km/h (ON) / 2.5 km/h (OFF) Compatibility Bosch Performance Line CX (Gen.5, motor mounted with 2 bolts) E-bikes using Bosch Rim Magnet (valve-mounted) Current Bosch Smart System software versions [View supported software versions] Not Compatible With Standard spoke-mounted magnets Bosch ABS system Bosch Gen.4 motors SpeedBox App Integration The SpeedBox App connects your e-bike to your mobile phone via Bluetooth 4.0 or higher. It displays real-time speed, trip data, and motor diagnostics, and allows you to: Activate/deactivate tuning Set custom speed limits Save and compare ride data Enable invisible mode Access service tools and diagnostics Before purchasing, download the app to test the demo version and confirm compatibility with your device. Available on Google Play and the App Store. Installation & Use SpeedBox 1.6 B.Tuning uses original Bosch connectors for secure, reversible installation. After setup, activate tuning while stationary using the app, WALK assist, or button sequence. To set a custom speed limit, switch modes in the following order: TURBO → eMTB → TOUR+ → ECO → TOUR+ → eMTB → TURBO The display will show the selected limit (e.g., 3.5 km/h = 35 km/h). After 15 seconds of inactivity, the setting is saved. After riding, leave the bike powered on until the display shows 0.0 km/h. This ensures proper data logging and safe shutdown. Do not remove the display before the countdown completes. Legal & Safety Notice SpeedBox products are intended for use on private property only. Use on public roads may violate local laws and void your e-bike’s warranty. Always wear protective gear and disable automatic firmware updates via the eBike Flow App to prevent tuning detection. Additional Notes Ride at least 10 km before activating tuning on a new bike Countdown duration may vary after long rides Activate/deactivate tuning only while stationary Do not exceed 35 km/h to avoid error codes If WALK assist is unavailable, use button sequence (- + - +) If PIN or service password is lost, recovery tools are available