REVERSE Seatswitch Type 1 - Saddle Angle Adjuster V2

Reverse Components SeatSwitch V2 Climbing Saddle Angle Adjuster SeatSwitch V2 - More Performance. More Comfort. More Control. The evolution continues: with the SeatSwitch V2, your bike gets a smart upgrade designed for maximum efficiency on climbs. This latest facelift combines proven functionality with targeted improvements for even better performance—whether on an e-MTB, enduro, gravel, or trail bike. Optimized down to the last detail, the improved dust cover reliably protects the internal mechanism from dirt and moisture in harsh conditions. The redesigned locking mechanism minimizes play to deliver a noticeably more direct feel when switching positions. Finished with sleek black anodized bolts, the V2 also accommodates optional clamp inserts for 7 mm oval carbon or alloy saddle rails. Your Advantage on the Climb Using the lever, you can adjust your saddle angle by 6°, lowering the saddle nose by up to 14 mm (depending on the saddle model) or raising it from your initial setup. The result is an optimal climbing position that places less pressure on sensitive areas, improves weight distribution between the handlebar and rear wheel, reduces lower back pain, and maximizes traction and technical climbing performance. Key Features 6° Angle Adjustability: Instantly switch your saddle position to optimize your posture for steep ascents and return to neutral for descents. Reduced Play & Enhanced Durability: Redesigned locking mechanism minimizes play, while an improved dust cover keeps out mud and moisture. Rail Compatibility: Standard round rail support with optional clamp adapters available for 7 mm oval rails. Ergonomic Benefits: Encourages optimal pelvic rotation, lessens lower back strain, and improves power transfer on long climbs. Specifications Brand: Reverse Components Product Type: Saddle Angle Adjuster / Climbing Lever Seatpost Interface: Type 1 *(additional shims available separately)* Stack Height Addition: + 23 mm Minimum Saddle Stack Required: 25 mm (center of rail to underside of saddle base) Adjustment Range: 2 positions (-6° / Neutral or Neutral / +6°) Clamping Design: Secure two-bolt saddle clamp with black anodized bolts Material: Aluminium / Steel Weight: 200g (± 5% / net increase over stock hardware approx. 65g) Item Code / SKU: SEATSWITCH-V2 *(Reference)* Compatibility List: View Compatibility PDF Installation Overview Installation requires a 4mm Allen key and the appropriate seatpost shim if required [00:00:09]. Remove your existing saddle and stock upper/lower seat clamp [00:00:21]. Place any necessary compatibility shim and the SeatSwitch unit onto the seatpost head [00:00:38]. Insert the rear bolt/brass washer through the mud cover and secure loosely, then insert the front steel retaining bar and bolt [00:00:43]. Reinstall your saddle onto the top rails, tighten the clamp bolts evenly to a recommended 6 Nm using a torque wrench [00:01:46], [00:02:17]. Set your baseline neutral saddle angle just like a standard seatpost [00:02:48]. Watch the official installation guide: YouTube Installation Video