Namura KTM Husqvarna Gas Gas 125cc-150cc Top Gasket Set

SKU: NX-70110T


$109.95

or 4 fortnightly payments of $27.49 with


Flat fee shipping!
Overnight courier from just $7
*Conditions Apply

Order before 3.30pm,
we ship today
*Conditions Apply

Quality materials mean increased longevity and continued performance. A critical aspect of any rebuild, gaskets are often given little thought. However, the right materials can make all the difference.

We do all of the thinking, so you don't have to. Our gaskets are manufactured from materials specifically chosen for each individual application. From top-end sets to complete kits for a full teardown, you can be sure that Namura gaskets are up to the task at hand.

Namura gaskets are manufactured to OE-specs, which means no trimming or fitment issues. Our materials are explicitly selected for their temperature, oil, fuel, and coolant-resistant qualities as well as tested using ASTM standards. Each design is evaluated against rigid quality-control standards to ensure each set meets or exceeds OE performance. Clutch gaskets are available for certain applications.

AF Gasket Material

Composed of non-asbestos Nitrile Butadiene bonded Cellulose fiber materials; they are commonly used in clutch cover, oil pump, and coolant applications. Components maintain their tensile strength and torque retention in operating conditions of over 300°F.

Steel & MLS (Multi-Layer Steel) Gaskets

No other gasket is more crucial than your head gasket. The seal between your cylinder and cylinder head is exposed to more heat and extreme pressures than anywhere else in your engine. In order to match these extreme conditions we offer one of the most advanced head gaskets on the market. Constructed from multiple layers of stainless steel to resist corrosion and erosive chemicals commonly found in your engine, then using an on-off pattern, our MLS gaskets are coated/embossed with a Fluoroelastomer based rubber to tightly seal the metallic mating surfaces. By doing this they can withstand the sheering forces created by the two surfaces (cylinder head and cylinder). This coating also enhances the bond between the gasket material and the imperfect surfaces commonly found when rebuilding your engine.

Seals & O-rings

NBR, Fluoroviton, and Silicone are selected for each application based upon the following characteristics: Temperature Resistance, Abrasion Resistance, Chemical Resistance, and their Aniline Point. A Teflon coating is applied on certain applications to prolong performance life.

(NX-70110T)

SKU NX-70110T
Brand Namura Technologies
Loading...

Be The First To Review This Product!

Help other MotoXparts users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category

KTM 65SX 09-23 Husqvarna TC65 17-23 44.97MM Top End Rebuild Kit Meteor Piston
TKKTM6509METB

KTM 65SX 09-23 Husqvarna TC65 17-23 44.97MM Top End Rebuild Kit Meteor Piston

$164.85 $149.95

9% OFF
Suzuki RM85 02-23 47.96MM Top End Rebuild Kit (Meteor Piston)
TKRM85METB

Suzuki RM85 02-23 47.96MM Top End Rebuild Kit (Meteor Piston)

$205.90 $189.95

8% OFF
Vertex KTM 350EXCF/XCF 20-23 350SXF 19-22 Top End Rebuild Kit 87.97MM
VTKTC24694B

Vertex KTM 350EXCF/XCF 20-23 350SXF 19-22 Top End Rebuild Kit 87.97MM

$549.95

Honda CR125 00-02 53.96MM Top End Rebuild Kit (Wossner Piston)
TKCR12500METB

Honda CR125 00-02 53.96MM Top End Rebuild Kit (Wossner Piston)

$273.85 $255.95

7% OFF
Honda CR125 00-02 53.96MM Top End Rebuild Kit (Wossner Piston)
TKCR12500WOSB

Honda CR125 00-02 53.96MM Top End Rebuild Kit (Wossner Piston)

$268.90 $252.95

6% OFF
Honda CR125 05-07 53.95MM Top End Rebuild Kit
TKCR12505WOSA

Honda CR125 05-07 53.95MM Top End Rebuild Kit

$283.90 $267.95

6% OFF