Namura Kawasaki KDX200 89-94 Complete Gasket Set

SKU: NX20008F


$147.95

or 4 fortnightly payments of $36.99 with


Flat fee shipping!
Overnight courier from just $5
*Conditions Apply

Order before 3.30pm,
we ship today
*Conditions Apply

Quality materials mean increased longevity and continued performance. A critical aspect of any rebuild, gaskets are often given little thought. However, the right materials can make all the difference. We do all of the thinking, so you don't have to. Our gaskets are manufactured from materials specifically chosen for each individual application. From top-end sets to complete kits for a full teardown, you can be sure that Namura gaskets are up to the task at hand. Namura gaskets are manufactured to OE-specs, which means no trimming or fitment issues. Our materials are explicitly selected for their temperature, oil, fuel, and coolant-resistant qualities as well as tested using ASTM standards. Each design is evaluated against rigid quality-control standards to ensure each set meets or exceeds OE performance. Clutch gaskets are available for certain applications.

AF Gasket Material Composed of non-asbestos Nitrile Butadiene bonded Cellulose fiber materials; they are commonly used in clutch cover, oil pump, and coolant applications. Components maintain their tensile strength and torque retention in operating conditions of over 300°F.

Steel & MLS (Multi-Layer Steel) Gaskets No other gasket is more crucial than your head gasket. The seal between your cylinder and cylinder head is exposed to more heat and extreme pressures than anywhere else in your engine. In order to match these extreme conditions we offer one of the most advanced head gaskets on the market. Constructed from multiple layers of stainless steel to resist corrosion and erosive chemicals commonly found in your engine, then using an on-off pattern, our MLS gaskets are coated/embossed with a Fluoroelastomer based rubber to tightly seal the metallic mating surfaces. By doing this they can withstand the sheering forces created by the two surfaces (cylinder head and cylinder). This coating also enhances the bond between the gasket material and the imperfect surfaces commonly found when rebuilding your engine.

Seals & O-rings NBR, Fluoroviton, and Silicone are selected for each application based upon the following characteristics: Temperature Resistance, Abrasion Resistance, Chemical Resistance, and their Aniline Point. A Teflon coating is applied on certain applications to prolong performance life. 

(NX20008F)

SKU NX20008F
Brand Namura Technologies
Loading...

Be The First To Review This Product!

Help other MotoXparts users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category

Hot Rods KTM/Husqvarna/Husaberg/GasGas Front Sprocket Countershaft Seal Kit
OSK0010

Hot Rods KTM/Husqvarna/Husaberg/GasGas Front Sprocket Countershaft Seal Kit

$44.95

Namura Gas Gas MC125 20-22 Husqvarna TC125 16-23 TE150 17-23 KTM 125SX 150SX 16-23 Top Gasket Set
NX70093T

Namura Gas Gas MC125 20-22 Husqvarna TC125 16-23 TE150 17-23 KTM 125SX 150SX 16-23 Top Gasket Set

$119.95

Namura Yamaha YZ250 02-21 YZ250X 16-21 Complete Gasket Set
NX40031F

Namura Yamaha YZ250 02-21 YZ250X 16-21 Complete Gasket Set

$99.95

Pro Seal Honda CRF150R 07-23 Complete Gasket Set
M2012792SG

Pro Seal Honda CRF150R 07-23 Complete Gasket Set

$149.95 $134.95

10% OFF
Pro Seal Honda CRF250R 10-17 Complete Gasket Set
M2012742SG

Pro Seal Honda CRF250R 10-17 Complete Gasket Set

$129.95 $124.95

4% OFF
Pro Seal Honda CRF250R 10-17 Top End Gasket Set
M2012744S

Pro Seal Honda CRF250R 10-17 Top End Gasket Set

$79.95 $74.95

6% OFF