Hot Rods Yamaha WR250F YZ250F 03-13 Conrod Kit

SKU: 8619


$374.95

or 4 fortnightly payments of $93.74 with


Flat fee shipping!
Overnight courier from just $5
*Conditions Apply

Order before 3.30pm,
we ship today
*Conditions Apply

One single connecting rod is where it all began for Hot Rods and now, with almost two decades of experience, continuously improved designs and an ever-expanding line of applications, Hot Rods has continued to be, not only “The Original” aftermarket replacement rod, but the best aftermarket replacement rod.

All of Hot Rods replacement rods are created from 8620 case hardened steel. But, in addition to that, they also undergo a special forging process which helps to improve grain flow as well as dimensional consistency — and that means a rod of uncompromising strength.

To improve fatigue durability, all Hot Rods rods are shot-peened. This process, utilizing a stainless steel shot, helps to remove stress risers and creates smoothly blended radiuses. 
In the end, Hot Rods connecting rod is one of the most durable rods that enthusiasts and engine builders can buy.

However, a rod is only as good as its supporting parts and that’s why a Hot Rods kit features only the most advanced and durable bearings. Case hardened and silver coated, the bearings are just as tough and reliable as the rods.
Hot Rods crankpins are subjected to the same rigorous standards as the rods and bearings. Each crankpin is created from hot-rolled ASTM 4115 steel and case-hardened to a level of 58–62 Rc.

FEATURES

  • Double-honed bearing surfaces to provide a reliable, high RPM rod
  • Double-drilled small ends for increased wrist pin lubrication
  • Bronze bushings in the small end of all four-stroke rods to maximize durability under high-loads and prevent galling
  • Specially designed vent slots in the large end of all two-stroke rods for improved lubrication
  • Side scalloping on large end to minimise high RPM rod distortion
  • Image is generic and may differ slightly to part supplied.

(8619)

SKU 8619
Brand Hot Rods
Loading...

Be The First To Review This Product!

Help other MotoXparts users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

Hot Rods KTM 350EXCF 12-13 350SXF 11-12 Conrod Kit
8693

Hot Rods KTM 350EXCF 12-13 350SXF 11-12 Conrod Kit

$384.95

Hot Rods Kawasaki KLX400 03-04 Suzuki DRZ400 00-23 Main Bearings And Seal Kit
K049

Hot Rods Kawasaki KLX400 03-04 Suzuki DRZ400 00-23 Main Bearings And Seal Kit

$164.95

Innteck Fantic Motor 12-14 Beta RR 250 RR 300 RR350 13-15 Gas Gas EC250 EC300 11-14 Marzocchi 48mm Outer Fork Bushing
S41TI48M

Innteck Fantic Motor 12-14 Beta RR 250 RR 300 RR350 13-15 Gas Gas EC250 EC300 11-14 Marzocchi 48mm O

$24.95

More From This Category

Honda CR85 03-07 Complete Engine Rebuild Kit (47.47MM Piston)
EKCR85METC

Honda CR85 03-07 Complete Engine Rebuild Kit (47.47MM Piston)

$424.75 $399.95

6% OFF
Hot Rods Honda CRF250R 06-17 CRF250X 07-17 Main Bearings And Seal Kit
K073

Hot Rods Honda CRF250R 06-17 CRF250X 07-17 Main Bearings And Seal Kit

$119.95

Vertex Kawasaki KDX200 89-06 KDX220 97-05 KX125 79-93 Small End Bearing
WB115

Vertex Kawasaki KDX200 89-06 KDX220 97-05 KX125 79-93 Small End Bearing

$34.95

Vertex KTM 125/150 98-24 Kawasaki KX125 98-08 Suzuki RM125 82-11 Husky TC125 14-24 Small End Bearing
M-8WB111

Vertex KTM 125/150 98-24 Kawasaki KX125 98-08 Suzuki RM125 82-11 Husky TC125 14-24 Small End Bearing

$28.95

Yamaha YZ250F 08-13 Stage 3 Engine Rebuild Kit (76.96MM Piston)
EK3YZF2508WOSA

Yamaha YZ250F 08-13 Stage 3 Engine Rebuild Kit (76.96MM Piston)

$959.80 $874.95

9% OFF
All Balls Honda CR125R 87-07 Main Bearings and Seal Kit
24-1003

All Balls Honda CR125R 87-07 Main Bearings and Seal Kit

$129.95