Hot Rods Yamaha WR250F 15-23 YZ250F 14-23 YZ250FX 15-23 Conrod Kit

SKU: 8717


$374.95

or 4 fortnightly payments of $93.74 with


Flat fee shipping!
Overnight courier from just $5
*Conditions Apply

Order before 3.30pm,
we ship today
*Conditions Apply

One single connecting rod is where it all began for Hot Rods and now, with almost two decades of experience, continuously improved designs and an ever-expanding line of applications, Hot Rods has continued to be, not only “The Original” aftermarket replacement rod, but the best aftermarket replacement rod.

All of Hot Rods replacement rods are created from 8620 case hardened steel. But, in addition to that, they also undergo a special forging process which helps to improve grain flow as well as dimensional consistency — and that means a rod of uncompromising strength.

To improve fatigue durability, all Hot Rods rods are shot-peened. This process, utilizing a stainless steel shot, helps to remove stress risers and creates smoothly blended radiuses. 
In the end, Hot Rods connecting rod is one of the most durable rods that enthusiasts and engine builders can buy.

However, a rod is only as good as its supporting parts and that’s why a Hot Rods kit features only the most advanced and durable bearings. Case hardened and silver coated, the bearings are just as tough and reliable as the rods.
Hot Rods crankpins are subjected to the same rigorous standards as the rods and bearings. Each crankpin is created from hot-rolled ASTM 4115 steel and case-hardened to a level of 58–62 Rc.

FEATURES

  • Double-honed bearing surfaces to provide a reliable, high RPM rod
  • Double-drilled small ends for increased wrist pin lubrication
  • Bronze bushings in the small end of all four-stroke rods to maximize durability under high-loads and prevent galling
  • Specially designed vent slots in the large end of all two-stroke rods for improved lubrication
  • Side scalloping on large end to minimise high RPM rod distortion
  • Image is generic and may differ slightly to part supplied.

(8717)

SKU 8717
Brand Hot Rods
Loading...

Be The First To Review This Product!

Help other MotoXparts users shop smarter by writing reviews for products you have purchased.

Write a product review

We Also Recommend

MotoXparts Crank Rebuild Service
CRANK

MotoXparts Crank Rebuild Service

$79.00

You May Also Like

MotoXparts Crank Rebuild Service
CRANK

MotoXparts Crank Rebuild Service

$79.00

More From This Category

Crankworx Yamaha WR450F 16-20 YZ450F/FX 10-19 Conrod Kit
CWRKYZF45010

Crankworx Yamaha WR450F 16-20 YZ450F/FX 10-19 Conrod Kit

$229.95 $199.95

13% OFF
Crankworx YZ80 93-01 YZ85 02-18 Conrod Kit
CWRYZ8502

Crankworx YZ80 93-01 YZ85 02-18 Conrod Kit

$149.95 $129.95

13% OFF
Honda CRF 250R 04-09 Crankshaft - Crankworx
CWCRF250R04

Honda CRF 250R 04-09 Crankshaft - Crankworx

$389.95 $359.95

8% OFF
Honda CRF250R 04-09 Bottom End Kit (Hot Rods Crank)
BKCRF25004HR

Honda CRF250R 04-09 Bottom End Kit (Hot Rods Crank)

$954.80 $899.00

6% OFF
Honda CRF450R 02-16 Main Bearings and Seal Kit - Rollex
CBK30015

Honda CRF450R 02-16 Main Bearings and Seal Kit - Rollex

$129.95

Hot Rods Suzuki RM250 05-12 Crankshaft Main Bearings and Seals
M-K057

Hot Rods Suzuki RM250 05-12 Crankshaft Main Bearings and Seals

$139.95