Hot Rods KTM 200EXC 98-16 200XC 06-16 200SX 03-04 Conrod Kit

SKU: M-HR8668


$189.95

or 4 fortnightly payments of $47.49 with


Flat fee shipping!
Overnight courier just $5
*Conditions Apply

Order before 3.30pm,
we ship today
*Conditions Apply

One single connecting rod is where it all began for Hot Rods and now, with almost two decades of experience, continuously improved designs and an ever-expanding line of applications.
 
All of Hot Rods replacement rods are created from 8620 case hardened steel. But, in addition to that, they also undergo a special forging process which helps to improve grain flow as well as dimensional consistency — and that means a rod of uncompromising strength.
To improve fatigue durability, all Hot Rods rods are shot-peened. This process, utilizing a stainless steel shot, helps to remove stress risers and creates smoothly blended radiuses. 
 
However, a rod is only as good as its supporting parts and that’s why a Hot Rods kit features only the most advanced and durable bearings. Case hardened and silver coated, the bearings are just as tough and reliable as the rods.
Hot Rods crankpins are subjected to the same rigorous standards as the rods and bearings. Each crankpin is created from hot-rolled ASTM 4115 steel and case-hardened to a level of 58–62 Rc.
FEATURES
  • Double-honed bearing surfaces to provide a reliable, high RPM rod
  • Double-drilled small ends for increased wrist pin lubrication
  • Bronze bushings in the small end of all four-stroke rods to maximize durability under high-loads and prevent galling
  • Specially designed vent slots in the large end of all two-stroke rods for improved lubrication
  • Side scalloping on large end to minimise high RPM rod distortion
  • 98% of motorbike crankshafts are rebuildable. Installing a conrod will take the important working areas of the crankshaft back to new specifications. Motoxparts offer a crankshaft rebuild service - More information about this service can be found in the "Engine" category under "Crankshaft & Bearings".
  • Image is generic and may differ slightly to part supplied.

(M-HR8668)

SKU M-HR8668
Brand Hot Rods
Loading...

Be The First To Review This Product!

Help other MotoXparts users shop smarter by writing reviews for products you have purchased.

Write a product review

We Also Recommend

MotoXparts Crank Rebuild Service
CRANK

MotoXparts Crank Rebuild Service

$79.00

NAC Tools Crankshaft Install Tool
M9529112

NAC Tools Crankshaft Install Tool

$149.95

NAC Tools Crankcase Splitter
M9538113

NAC Tools Crankcase Splitter

$159.95

You May Also Like

MotoXparts Crank Rebuild Service
CRANK

MotoXparts Crank Rebuild Service

$79.00

More From This Category

Honda CRF250R CRF250X 04-17 Conrod Kit - Crankworx
CWRCRF2504T

Honda CRF250R CRF250X 04-17 Conrod Kit - Crankworx

$199.95 $169.95

15% OFF
NAC Tools Crankcase Splitter
M9538113

NAC Tools Crankcase Splitter

$159.95

Crankworx Suzuki DRZ400 00-23 Conrod Kit
CWRDRZ40000

Crankworx Suzuki DRZ400 00-23 Conrod Kit

$199.95 $169.95

15% OFF
Honda CR125 2003 Bottom End Rebuild Kit
BKCR12503

Honda CR125 2003 Bottom End Rebuild Kit

$534.80 $445.00

17% OFF