Goldfren Husqvarna 701 Enduro / Svartpilen 401 / Vitpilen 401 / Vitpilen 701 S3 Sintered Sports Rear

$49.99

or 4 fortnightly payments of $12.50 with

Flat fee shipping!
Overnight courier from just $7
*Conditions Apply

Order before 3.30pm,
we ship today
*Conditions Apply

GOLDfren began manufacturing sintered disc brake pads for a wide range of off-road and road motorcycles in 1991, nearly three decades on from their first motorcycle brake pads GOLDfren has become one of the largest aftermarket manufacturers in the motorcycle brake disc pad industry. Their development of next-generation products has kept them at the technological forefront of Sintered Friction Braking providing you with confidence in the performance, durability and reliability of your brakes.

S3 Series:

The S3 sintered compound is optimal in dry and wet conditions for road & off-road motorcycles. For the road application, S3 pads are suitable for both the front and rear brake while on off-road applications the S3 is only recommended for the front brake. The S3 series is designed for low abrasive interaction with the rotor and quieter braking due to the ceramic composite material. It has an HH friction rating and performs better at higher temperatures than the AD compound. Friction materials contain metal-ceramic with a bronze-graphite and non-metallic friction additives are spread evenly on the base fine bronze body to achieve optimal friction properties.

Features:

Very high static friction coefficient
Minimal difference between wet and dry braking performance
Good abrasive resistance
Low abrasive interaction with the brake rotor material
Longer life compared to organic and Kevlar composite materials

Application:

For riders who demand a bit more than average from their bikes
Recommended on both front and rear brakes (road application)
Can also be used on the front brakes of off-road bikes and ATVs
Works well on both dry and wet conditions

Operating Parameters:

Specific pressure: 3.0 Mpa
Sliding speed: 45 m/s
Constant maximum temp: 450°C
Short time maximum temp: 800°C
Counter-surfaces: steel disks

What is a sintered brake pad?

GOLDfren only manufacturers sintered brake pads that contain metal-ceramic and ceramic-carbon friction materials, these materials allow for less brake dust and a quieter braking experience. Sintered brake pads are made by fusing together metallic particles under high temperature and pressure which enhances friction properties and pad life, resulting in longer life and stronger braking. Sintered brake pads experience no brake fade when operating at high temperatures and in wet conditions. They also last up to 5 times longer than organic pads and provide additional braking strength. All materials used are environmentally friendly and do not contain any lead, asbestos, fibreglass or formaldehyde.

Reminder: one set of brake pads services one brake disc, if you are servicing multiple discs you will need multiple sets of brake pads.

Check Bike Compatability tab for fitment.

Also Fits:

Husqvarna	Vitpilen 401	2018 - 2024
Husqvarna	Vitpilen 701	2018 - 2021
Husqvarna	Vitpilen 801	2025 - 2025

Husqvarna	Svartpilen 401	2018 - 2024
Husqvarna	Svartpilen 701	2020 - 2021

Husqvarna

701 Supermoto

2016 - 2024

KTM	660 Super Moto	2003 - 2006
KTM	690 Duke	2008 - 2017
KTM	690 Duke ABS	2012 - 2015
KTM	690 Duke R	2010 - 2017
KTM	690 Enduro	2008 - 2010

KTM	690 Enduro R	2011 - 2024
KTM	690 Enduro R	2026 - 2026
KTM	690 SMC	2008 - 2010
KTM	690 SMC R Supermoto	2012 - 2021
KTM	690 SMC R Supermoto	2024 - 2024
KTM	690 SMC R Supermoto	2026 - 2026
KTM	690 Supermoto	2008 - 2009
KTM	790 Duke	2018 - 2020
KTM	790 Duke	2024 - 2024
KTM	890 Duke	2021 - 2023
KTM	890 Duke R	2020 - 2023
KTM	890 SMT	2024 - 2024
KTM	950 LC8 Adventure	2002 - 2004
KTM	990 Duke	2024 - 2024
KTM	990 Super Duke	2004 - 2013