DEP Yamaha YZ250 02-23 YZ250X 16-22 Shorty Silencer

SKU: DEPY2216


NZ $269.95

or 4 fortnightly payments of NZ $67.49 with


Flat fee shipping!
Overnight courier from just NZ $5.00
*Conditions Apply

Order before 3.30pm,
we ship today
*Conditions Apply

Note: This item cannot be shipped to Australia.

Our 2 stroke silencers are designed to fit OE and DEP front pipes. The silencers are manufactured with a polished aluminium outer canister and a mild steel internal perforated core, surrounded with a high temperature Eglass packing. All silencers have been designed as a performance enhancing product for optimum power increase, we advise this to be used with a DEP front pipe. Our silencers are easily repackable.

  • Improved power and throttle response to OEM silencers
  • Alloy silencer body easily repackable with stainless end cap
  • New range of retro/classic racing models available

 
2 Stroke Silencer Fitting Instructions
Loosen the silencer mounting bolts from the frame and remove your original silencer from the bike. Install the DEP silencer, making sure it does not touch the sub-frame before tightening mounting bolts. Retain any rubber grommets/sleeves from the original silencer and refit on your DEP silencer, if required. All the exhaust fixing points should be slackened and then fully tightened allowing all frame mounting points to line up exactly. A silencer fitted under stress can cause failure or damage to the product. DEP cannot be held responsible for any incorrectly fitted products. The fitting to non-original equipment or DEP equipment is the responsibility of the end user.

2 Stroke Silencer Re-packing Instructions
The performance and low noise efficiency of this silencer will be impaired if it is not serviced on a regular basis. Remove the bolts or rivets, remove the end caps, inner core and packing material. Inspect and clean where necessary. Re-pack the silencer with DEP matt packing. To maintain peak performance the silencer should be inspected regularly and the packing material replaced if it has exceeded its serviceable life.

Please note image to be used for reference only; silencers may vary between models, correct part will be supplied.

(DEPY2216)

SKU DEPY2216
Brand DEP Pipes
Loading...

Be The First To Review This Product!

Help other MotoXparts users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

Pro Seal Husqvarna TE/TC 125 14-16 KTM 125-200 EXC/SX/XC 98-15 Engine Oil Seals
00822187

Pro Seal Husqvarna TE/TC 125 14-16 KTM 125-200 EXC/SX/XC 98-15 Engine Oil Seals

NZ $49.95

POLISPORT HONDA CR125R CR250R 04-07 BRAKE & CLUTCH LEVER KIT
PS91577

POLISPORT HONDA CR125R CR250R 04-07 BRAKE & CLUTCH LEVER KIT

NZ $79.99

More From This Category

MX Pro 2 Stroke Muffler Exhaust Packing
M9517012

MX Pro 2 Stroke Muffler Exhaust Packing

NZ $17.95

MX Pro Exhaust Muffler Plug - Large Orange - 35mm-60mm
M9520230

MX Pro Exhaust Muffler Plug - Large Orange - 35mm-60mm

NZ $9.95

BOLT GAS GAS HUSQVARNA KTM 50cc-300cc 2 STROKE EXHAUST MOUNT KIT
BLTEHPEXMNTS

BOLT GAS GAS HUSQVARNA KTM 50cc-300cc 2 STROKE EXHAUST MOUNT KIT

NZ $39.99

MX Pro Yamaha YZ250 99 - 0n Exhaust Hardware Kit
8001-8001

MX Pro Yamaha YZ250 99 - 0n Exhaust Hardware Kit

NZ $27.95

BOLT GAS GAS HUSQVARNA KTM 200cc-300cc EXPANSION CHAMBER SEALS & SPRINGS
BLTEHPEU200300CC

BOLT GAS GAS HUSQVARNA KTM 200cc-300cc EXPANSION CHAMBER SEALS & SPRINGS

NZ $39.99

BOLT GAS GAS MC125 HUSQVARNA 125cc-150cc KTM 125cc-200cc EXPANSION CHAMBER SEALS & SPRINGS
BLTEHPEU105150CC

BOLT GAS GAS MC125 HUSQVARNA 125cc-150cc KTM 125cc-200cc EXPANSION CHAMBER SEALS & SPRINGS

NZ $39.99