Crankworx KTM 85SX 13-17 Husqvarna TC85 14-17 Complete Crankshaft

SKU: CWCKTM8509


$329.95

or 4 fortnightly payments of $82.49 with

RRP $379.95
SAVE $50.00 (13%)

Flat fee shipping!
Overnight courier from just $7
*Conditions Apply

Order before 3.30pm,
we ship today
*Conditions Apply

KTM/Husqvarna Crankshaft from Crankworx – Crankworx have taken their manufacturing processes of their high performance crankshafts to the next level in durability & strength - to a level that genuine and other manufactures can only dream of.

The Crankworx crankshaft has been designed specifically for use in stock, high modified and big bore engines from the pro racer to the everyday trail rider. Trued & balanced to tighter tolerances than genuine and when properly installed the Crankworx crank will perform flawlessly in the highest powered engine at the highest level of the sport.

Each crank is fitted with a Crankworx "Racer Rod" a true performance racing conrod - being manufactured from double forgings resulting in the correct grain flow for strength, shotpeen to relive stress, magnafluxed at least twice to check for imperfections and Rockwell tested to validate hardness. Bearings running surfaces are round to 50 millionths and double hone to a mirror finish. Each conrod has a true racers top end with a special aluminium/silicon/bronze bush installed, this extends the conrod, piston and pin life under extreme loads at rpm. (have a look at the other brands and it will be easy see why Crankworx is a true racers crank)

  • Complete crankshaft comes ready fit & includes, conrod kit, crank webs, timing gear.
  • Direct replacement - Drop in and go
  • Double drill top end - better lubrication, less wear
  • Trued & balanced to tighter tolerances than genuine 
  • Manufactured from true forgings resulting in the proper grain flow
  • Each part is double magnafluxed
  • Rockwell tested to validate the correct hardness
  • Conrod is shotpeen to relive stress
  • Conrod has a bushed end bearing this is made from special aluminium/silicon/bronze material increases piston and pin life
  • Image is generic and may differ slightly to part supplied.

(CWCKTM8509)

SKU CWCKTM8509
Brand Crankworx
Loading...

Be The First To Review This Product!

Help other MotoXparts users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category

All Balls Yamaha YZ125 05-23 YZ125X 17-23 Main Bearings And Seal Kit
24-1062

All Balls Yamaha YZ125 05-23 YZ125X 17-23 Main Bearings And Seal Kit

$129.95

Crankworx Honda CR80 90-02 CR85 03-07 Conrod Kit
CRD30013

Crankworx Honda CR80 90-02 CR85 03-07 Conrod Kit

$129.95

Crankworx Yamaha YZ125 05-21 Conrod Kit
CRD90005

Crankworx Yamaha YZ125 05-21 Conrod Kit

$129.95

Hot Rods Yamaha YZ125 05-24 YZ125X 20-24 Transmission Bearing Kit
TBK0064

Hot Rods Yamaha YZ125 05-24 YZ125X 20-24 Transmission Bearing Kit

$249.95

NAC Tools Crankshaft Install Tool
M9529112

NAC Tools Crankshaft Install Tool

$149.95

Vertex KTM 125SX 23-24 Husqvarna TC125 23-24 Race Evo 53.94mm Top End Rebuild Kit (Single Ring)
VTK24445A-4

Vertex KTM 125SX 23-24 Husqvarna TC125 23-24 Race Evo 53.94mm Top End Rebuild Kit (Single Ring)

$369.95