Crankworx KTM 125-150SX 16-22 Husqvarna TC125 16-22 Conrod Kit

SKU: CWRKTM12516


$169.95

or 4 fortnightly payments of $42.49 with

RRP $199.95
SAVE $30.00 (15%)

Flat fee shipping!
Overnight courier from just $7
*Conditions Apply

Order before 3.30pm,
we ship today
*Conditions Apply

KTM/Husqvarna Conrod from Crankworx – Crankworx have taken their manufacturing processes of their high performance Rod conrod to the next level in durability & strength.

The Crankworx Rod has been designed specifically for use in stock, high modified or big bore engines for the pro racer to the everyday trail rider. When properly installed the Crankworx Rod will perform flawlessly in the highest powered engine at the highest level of the sport.

Crankworx Rod a true performance racing conrod - being manufactured from double forgings resulting in the correct grain flow for strength, shotpeen to relive stress, magnafluxed at least twice to check for imperfections and Rockwell tested to validate hardness. Bearings running surfaces are round to 50 millionths and double hone to a mirror finish. 

Motoxparts can fit and balance this rod to your crank for a low cost - 98% of motorbike crankshafts are rebuildable. Installing a conrod crankshaft rebuild will take the important working areas of the crankshaft back to new specifications . More information about this service can be found in the "Engine" category under "Crankshaft & Bearings".

  • Meets genuine specifications
  • Conrod kit includes: Conrod, crankshaft/conrod main big end pin, conrod center big end bearing, set of thrust washers
  • Manufactured from true forgings resulting in the proper grain flow
  • Each part is double magnafluxed
  • Double top bearing oil holes in rod - this provides more needed oil to the highest load area – piston pin & top end bearing
  • Rockwell tested to validate the correct hardness
  • Conrod is shotpeen to relive stress
  • Image is generic and may differ slightly to part supplied.

(CWRKTM12516)

SKU CWRKTM12516
Brand Crankworx
Loading...

Be The First To Review This Product!

Help other MotoXparts users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

NAC Tools Flywheel Puller M27 x 1.0 L.H
M9511141A

NAC Tools Flywheel Puller M27 x 1.0 L.H

$27.95

Crankworx KTM 250SX 03-16 Husqvarna TC250 14-16 Complete Crankshaft
CWCKTM250TC250

Crankworx KTM 250SX 03-16 Husqvarna TC250 14-16 Complete Crankshaft

$389.95 $359.95

8% OFF
All Balls Gas Gas Husqvarna KTM SX/SXF 16-25 Rear Brake Pedal Rebuild Kit
AB182003

All Balls Gas Gas Husqvarna KTM SX/SXF 16-25 Rear Brake Pedal Rebuild Kit

$79.98

More From This Category

All Balls Yamaha YZ125 05-23 YZ125X 17-23 Main Bearings And Seal Kit
24-1062

All Balls Yamaha YZ125 05-23 YZ125X 17-23 Main Bearings And Seal Kit

$129.95

Crankworx Honda CR80 90-02 CR85 03-07 Conrod Kit
CRD30013

Crankworx Honda CR80 90-02 CR85 03-07 Conrod Kit

$129.95

Crankworx Yamaha YZ125 05-21 Conrod Kit
CRD90005

Crankworx Yamaha YZ125 05-21 Conrod Kit

$129.95

Hot Rods CRF150R 07-23 Main Bearing And Seal Kit
K052

Hot Rods CRF150R 07-23 Main Bearing And Seal Kit

$149.95

Kawasaki KX65 06-23 Complete Engine Rebuild Kit (44.46MM Piston Kit)
EKKX6506WOSB

Kawasaki KX65 06-23 Complete Engine Rebuild Kit (44.46MM Piston Kit)

$664.80 $575.95

13% OFF
NAC Tools Crankshaft Install Tool
M9529112

NAC Tools Crankshaft Install Tool

$149.95