Front Brake rotor the D-RAD from Delta Braking of Europe has been designed for motocross racer or serious off road rider who is bike weight conscious and values every ounce (or gram) of performance they can get. The D-RAD has been developed to be low in weight and to help reduce braking temperatures which helps decrease brake fade therefore helping to increase stopping power.

The outer scallop design of the D-RAD not only makes it the best looking rotor currently on the market, this design also helps increase air flow over the rotor which in-turn helps to lower the rotor and pad temperatures. The cross-drilling holes in the rotor are for weight reduction and to give the rotor an air flow-through effect to also assist in reducing heat.

The D-RAD rotor is laser cut from a special heat treated carbon stainless steel material; both faces are perfectly parallel grind with a low RA finish, these results in longer wear life and reduced brake pad galling effect. 

If you are bike weight conscious and want a top line rotor that looks great at very reasonable price the D-RAD from Delta Braking is for you.

Motoxparts is proud the exclusive New Zealand distributor/importer for Delta Braking of Europe

Very Important - Rotor & Adapter are sold separately please read 1 & 2 below

1- If the bike does not have a 270mm oversize front brake rotor on it now, you will have to purchase the rotor and adapter together. The rotor will not work without an adapter.  

2-   If the bike has already got a 270mm oversize rotor on it and it needs to be replaced, the rotor only will need to be purchased.  As the bike should already have an oversize adapter on it already

Note: This rotor works with any brand of adapter made for a 270mm rotor and this adapter will work with any brand of 270mm rotor, so you can fit this rotor if you already have a 270mm adapter or visa-versa.

• Made in Europe
• Can be used with all brands and any type of pad material
• Used buy some of Europe’s top riders
• Rotors are the same dimensions as stock and are a direct bolt up to stock mounting points.
• Highest quality carbon 420 stainless steel from Europe
• Stress relieving process to stop the rotor from cracking & wrapping
• Image is generic and may differ a bit (main shape of rotor will be the same)