MX Gear Australia & NZ at the Best Prices Australia & NZ's MX Store Low Shipping Rates

Bike parts &
Accessory finder

Find all the parts that fit your bike
Shipping and Returns

Swingarm/Linkage Bearing Removal/Install Tool

Part No: M9547134
24.82 USD

This item is currently out of stock

Notify me when this is back in stock:

Removing and fitting motorbike swingarm & suspension linkage bearings is easy and fast with this bearing removal and installation tool from MX Pro.

Using the MX Pro swingarm/linkage bearing tool to remove bearings from the motorbike linkage or swingarm areas avoids damage to bearing housings and when used to install thin-walled swingarm or linkage bearings, it avoids damage to bearing cages.

Get it right first time make it very easy and fast - use this tool.  It works out a lot less expensive than buying another bearing kit.

New bearings can be easily damaged if the bearing is not installed parallel with the housing it’s going into or if the bearing is hit with a hammer. Poor installation methods with the wrong tools will damage bearings beyond use.

Note* May not work with European motorbikes  - please check tool size below and in images.

  • Works with virtually all Japanese off-road dirt bikes.
  • Designed for installation and removal of the swingarm & linkage bearings on most 1990 to present metric motorcycles Honda, Yamaha, Suzuki, Kawasaki….
  • Kits includes sizes I.D. 20mm/O.D 26mm, I.D. 21mm/O.D. 26mm & I.D. 22mm /O.D.27mm
  • 200 mm long threaded installation bolt with two nuts.
  • Note* May not work with European motorbikes  - check tool size.
  • Note* Image 2-3 is of tool and what it comes with
  • Note* When using as a removal tool a socket or tube will have to be used on one side of the swingarm to accommodate the bearing that is being removed to be pushed into. This tool does not include a socket or tube.