Motorbike Front Suspension Fork Support - Ever see the guy that loads up his dirt bike in the back of his vehicle, making sure the front forks are pulled down really tight by tie downs? That's the same guy who will likely have leaking front fork seals the next time you see him.
Using a fork support prevents premature damage to fork springs and seals resulting from continuous and too much compression for long periods while forks are strapped down during transportation. It also stabilises the bike during transportation so tie downs won’t bounce off your bike.
Be safe, be smart, use a Front Fork Support from MX Pro to protect fork seals and springs and keep your bike secure. It only costs a few dollars and may save you thousands.
If unsure of fitment check image gallery for image of fork supports with measurements, it is easy to work out just what one you need, just measure between the bikes front tire to the inside of the front mudguard. Some bikes may need to be lifted at the front to take the weight of the forks to get the correct measurement.
Note: It’s quite normal for there to be a gap when the fork support is first fitted between the fork support and front mudguard. When tie downs are compressed this gap is closed. Some motorbikes will require front suspension to be lifted slightly to fit fork support.